CGDI MB AC Adapter Collect EIS Data for Benz W164 All Key Lost in 6 Minutes

This tech post show a guide on how to use CGDI MB to collect EIS data quickly for Benz W164 all key lost programming.

Preparations:
CGDI Benz Prog
CGDI Benz AC Adapter

Procedures:
Run CGDI MB Prog software and select “Wiring Diagram”,then check the wire harness diagram

Follow the wire diagram to build wire harness connection

Select “EIS” option at left menu bar,then click “Read EIS data”

After reading EIS data,click “Compute Password” at left menu bar

Chose “Copy key without key”,and click “Collect Data”.

Then select “Platform mode(Quick collect)” and click “OK” to start data collection

Please insert the simulation key within 1 minutes,if you have inserted,please pull out and try again.
(Please turn the quick collect adapter switch to the Platform position.Turn the key to ignition ON position)

It will take you about 6 minutes to collect data,please wait…

Note:By traditional method,you need spend hours

After data collection completing,save the data on your laptop

Then click “Upload Data” button to upload the data you save just now for password caculation

Calculation successfully

Done!