How to Perform SPS Programming for for instrument panel controller calibration updates on Chevrolet Cruze with GM MDI Diagnostic Tool?

Purpose:

Perform GM SPS (Service Programming System) Programming J2534 mode for instrument panel controller (IPC) calibration updates using GM MDI scan tool.

 

This can be for the ECU or any programmable module in the vehicle, such as the EBCM, TCM, Radio, or IPC that you may want to reflash.

 

Model example: Chevrolet Cruze Passenger car 2012

(Applicable to model year 2011 and up, which is when the Tech2 ended and was fully replaced by the GM Multiple Diagnostic Interface, or GM MDI and MDI 2, and TIS2Web subscriptions.)

 

What you need to program:

High Quality GM MDI clone with WiFi

A laptop

GM online subscription (or https://www.acdelcotds.com/subscriptions)

 

GM MDI SPS Programming J2534 Mode ECU TIS2Web Calibration Update:

Select SPS programming->Start SPS

1

2

Select Interface as J2534 MDI and programming process: Reprogram ECU

3

Connect J2534 device (GM MDI interface) to vehicle and PC

4

5

Turn ignition off

verify vehicle battery fully charged

Turn ignition on, engine off

Connect J2534 device to Data Link Connector

Connect J2534 device to PC

Switch J2534 mdi on and wait for MDI  to get ready

After programming erase all DTC of all ECUs

 

After communication is built, select vehicle model

6

Chevrolet Cruze Passenger car 2012

7

Display and confirm VIN

8

9

Select control module, function and type to reflash

–IPC Instrument Cluster

–Programming

–Normal programming type

10

Check current calibration version and available update

11

12

13

Perform new software for Trip Timer update

14

During programming procedure, the dashboard turns black which is normal

15

16

Wait until the programming process count down to 0

17

Turn off the key for 30 seconds and then back on to complete the programming reset the controller.  Dashboard turns on.

18

IPC calibration update completed.

19

Record the code and erase all fault codes existed.

 

Done.

Be the first to comment

Leave a Reply

Your email address will not be published.


*