2018-2020 Maserati Ghibli is supported to add new keys by Autel MaxiIM IM508, IM608, IM608 Pro via OBD successfully. All keys lost and read passwords are workable as well.
IM508/IM608 Maserati Ghibli IMMO Functions List
| Vehicle Model | Year | System | Add Key | All Keys Lost | Read Password |
| Ghibli | 2013-2015 | Keyless System(CAN) | By OBD | By OBD | By OBD |
| Ghibli | 2016 | Keyless System(CAN) | By OBD | By OBD | By OBD |
| Ghibli | 2017 | Keyless System(CAN) | By OBD | By OBD | By OBD |
| Ghibli | 2018-2020 | Keyless System(CAN) | By OBD | By OBD | By OBD |
How to add a key for 2018-2020 Maserati Ghibl?
This is taking Autel IM608 to program a 2019 Maserati Ghibli new key as example.
Plug connector into OBD, press
* IMMO >> Maserati >> Manual selection >> Ghibli >> 2016- smart key >> Keyless system(CAN) >> Read immobilizer data
Make sure the network connection is well.
OK >> OK
Turn the ignition off and turn on emergency flashers.
It’s processing to read IMMO data…
Please wait…
Note:
Be careful and DO NOT touch any buttons at this step, otherwise that may damage the car.
It takes about 30 minutes to get the code.
Save the file.
The backup was successful. The data can be used for key match or key clear.
Finally got the pin code, it’s 5922.
* Key learning >> OK >> Load data file >> OK
Turn the ignition off and turn on emergency flashers.
Place the smart key to be learned on the central panel, press UNLOCK button repeatedly within 30s until the door lock actuates accordingly.
Learning successful.
Test the new key, it can start the vehicle, and remote works well.
Maserati Ghibli key adding has done!
Leave a Reply