Recently, Obd2tool.com releases a new probe -Single probe solderless connector. What can it do? What’s the advantage of it? How to use? Check the details below.
1.What can Single Probe Solderless Connector do?
It is used to connect the BOOT point without soldering when open DME shell to read ISN code or change second-hand ECU. It’s suitable for all the devices in the market such as Yanhua Mini ACDP and others.
2.Single Probe Solderless Connector Advantages:
-Excellent versatility:
Compared with the traditional ECU worktable, it is compact in size, easy to carry, has multiple fixing modes, more suitable for outdoor or indoor work;
-Simple and high efficiency operation:
The connection can be simple completed by pulling and pressing.
-Modular design:
It can free switch among single point connection, multi-point connection and combination connection.
3.How to use Single Probe Solderless Connector?
Step 1: Fix the clip
Method 1: Clamp the edge of the table
Method 2: Clamp the flat without components area of ECU PCB board edge
Method 3: Clamp the ECU socket
Step 2: Fix and straighten the flexible arm
-Tighten the screw to fix the flexible arm
-Straighten the flexible arm
Step 3: Aligh and prick the probe at the test point
Use the PCB probe board to align the through-hole test point or solder pad test point
Step 4: Press the PCB probe board with flexible arm
Note: the angle between the flexible arm and the PCB probe board should be kept at 90
-Press download the flexible arm
-Adjust the angle of the flexible arm so that the probe has a certain compression
Step 5: Check the contact point and the probe compression
Adjust the inclination of flexible arm according to the length of the probe compression
Leave a Reply