Top 6 Advantages of LAUNCH X431 V 8″ Lenovo Tablet PC

Original Launch X431 V 8 inch Tablet Wifi/Bluetooth Full System Diagnostic Tool the replacement of Launch X-431 V Pro 7 inch.

Top 6 Advantages of LAUNCH X431 V 8″ Lenovo Tablet PC:

1. Completely replace X431 V 7inch and have bigger screen.

2. Support multi-languages: English, German, Japanese, Russian, French, Korea, Arabic, Italian,Spanish

3. Support communicate with vehicle via Bluetooth, Bluetooth distance: 10M(Without Obstacle). Free to change Bluetooth if it broken within warranty.

4. Support full system diagnosis and fast running speed,Reasonable PDA design, easy to carry

5. Supports up to 69 car brands about 220 car models from European, USA and Asian

6. Free Update online for 2 years, after 2 years it is 799USD/year. Dealer code: 755D

7.No need to open authorization. No IP, no country and language limitation.

What is X431 V 8″ Original ?

X431 V is a new OBD2 Scanner released by Launch tech,composed of an X-431 V tablet, a protection sleeve, a DBScar diagnostic connector and many OBD1 to OBD2 connectors. It communicates with your car by connecting DBSCAR with Bluetooth, it reads car DTCs and performs diagnosis by the Launch X431 Scan Tool X431 Pro Pad computer, it achieves X431 series full car model and full-system diagnose function, it can replace X431 Diagun III or X431 IV. Meanwhile, taking advantage of mobile internet, it integrates more application and service, such as creating maintenance data base and case library, providing instant maintenance information, establishing public and private maintenance social circle etc. As a result, it builds a broad vehicle diagnostic community, which helps you to share vehicle maintenance knowledge online, exchange vehicle maintenance experience online and provide vehicle maintenance related service support online. This will be another revolution raised by Launch in the vehicle diagnosis industry.

Launch X431 V 8″ Tablet User Manual

Powerful diagnosis Function:

1.  Full Diagnosis Function:

1. Diagnose

A. Diagnose the electronic control system of prevailing vehicle models covering Asian, European, American and Chinese. Diagnosis functions include: Read DTCs, Clear DTCs, Read data stream, Special functions etc;

Specially designed for Android platform with clear and user-friendly interface;

Via Bluetooth, it is simple for diagnostic connector to communicate with X-431 V 8inch;

Equipped with an exclusive X-431 V 8inch protective sleeve to prevent it from being damaged.

B. One-click Update: lets you update your diagnostic software more efficiently.

C. Repair Data: Provides abundant automotive handbook, repair case and wiring diagrams for reference and retrieval.

2. Browser: built-in Wi-Fi module makes surfing on the internet freely;

3. Email: allows you to send and receive email.

4. Search: enables you to locate your target quickly and conveniently;

5. Settings: to configure your personalized X-431 V through it;

6. Applications: other android based applications can be customized to install or uninstall.

Special Function

Allows you to detect to check if the system parameters are normal or not, including: Injector test, fuel pump test, purge control solenoid and so on.

Take “1# injector” as an example. To detect  1# injector works condition, tap “1# injector”, the system will automatically carry out the function. After completing, a prompt dialog box will pop up on the screen.
X431 V 8INCH Full Diagnosis
Reset Service

Besides amazing & powerful diagnostic function, X-431 V 8inch also supports various service functions. The most commonly performed service functions contain:

Oil Reset Service
Steering Angle Calibration
Electronic Parking Brake Reset
Battery Register / Battery Maintenance
ABS Bleeding
Electronic Throttle Position Reset / Learn
Diesel Particulate Filter (DPF) Regeneration
Tire Pressure Monitor System Reset

Oil Reset Service

This function can be performed in the following cases:

1. If the service lamp is on, you must provide service for the car. After service, you need to reset the driving mileage or driving time so that the service lamp turns off and the system enables the new service cycle.

2. After changing engine oil or electric appliances that monitor oil life, you need to reset the service lamp.

Steering Angle Calibration

1. To reset the steering angle, first find the relative zero point position for the car to drive in straight line. Taking this position as reference, the ECU can calculate the accurate angle for left and right steering.

2. After replacing the steering angle position sensor, replacing steering mechanical parts (such as steering gearbox, steering column, end tie rod, steering knuckle), performing four-wheel alignment, or recovering car body, you must reset the steering angle.

Electronic Parking Brake Reset

1. If the brake pad wears the brake pad sense line, the brake pad sense line sends a signal sense line to the on-board computer to replace the brake pad. After replacing the brake pad, you must reset the brake pad. Otherwise, the car alarms.

2. Reset must be performed in the following cases:

a) The brake pad and brake pad wear sensor are replaced.

b) The brake pad indicator lamp is on.

c) The brake pad sensor circuit is short, which is recovered.

d) The servo motor is replaced.

Electronic Throttle Position Reset/Learn

This function enables you to initialize the throttle actuators so that the “learned” values stored on ECU are returned to the default state. Doing so can accurately regulate throttle (or idle engine) operations to control the amount of air intake. Throttle matching must be performed in the following cases:

a) The ECU is replaced and the ECU does not yet store throttle working features.

b) The ECU is disconnected from power and the ECU memory is lost.

c) The throttle assembly is replaced.

d) The intake pipe is replaced or removed, which affects idle speed control by ECU and throttle body.

e) The throttle is cleaned. Although the idle throttle potentiometer features remain unchanged, with the same throttle opening, the air inflow has changed and idle speed control features have changed.

Battery Register/Battery Maintenance

This function enables you to perform a resetting operation on the monitoring unit of vehicle battery, in which the original low battery fault information will be cleared and battery matching will be done.

Battery matching must be performed in the following cases:

a) Main battery is replaced. Battery matching must be performed to clear original low battery information and prevent the related control module from detecting false information. If the related control module detects false information, it will invalidate some electric auxiliary functions, such as automatic start & stop function, sunroof without one-key trigger function, power window without automatic function.

b) Battery monitoring sensor. Battery matching is performed to re-match the control module and motoring sensor to detect battery power usage more accurately, which can avoid an error message displaying on the instrument panel.

ABS Bleeding

This function allows you to perform various bi-directional tests to check the operating conditions of Anti-lock Braking System (ABS).

1. When the ABS contains air, the ABS bleeding function must be performed to bleed the brake system to restore ABS brake sensitivity.

2. If the ABS computer, ABS pump, brake master cylinder, brake cylinder, brake line, or brake fluid is  replaced, the ABS bleeding function must be performed to bleed the ABS.

Tire Pressure Monitor System Reset

1. After the tire pressure MIL turns on and maintenance is performed, the tire pressure resetting function must be performed to reset tire pressure and turn off the tire pressure MIL.

2. Tire pressure resetting must be performed after maintenance is performed in the following cases: tire pressure is too low, tire leaks, tire pressure monitoring device is replaced or installed, tire is replaced, tire pressure sensor is damaged, and tire is replaced for the car with tire pressure monitoring function

Diesel Particulate Filter (DPF) Regeneration

DPF regeneration is used to clear PM (Particulate Matter) from the DPF filter through continuous combustion oxidation mode (such as high temperature heating combustion, fuel additive or catalyst reduce PM ignition combustion) to stabilize the filter performance. DPF regeneration may be performed in the following cases:

a) The exhaust back pressure sensor is replaced.

b) The PM trap is removed or replaced.

c) The fuel additive nozzle is removed or replaced.

d) The catalytic oxidizer is removed or replaced.

e) The DPF regeneration MIL is on and maintenance is performed.

f) The DPF regeneration control module is replaced.

2. Connecting by Bluetooth

X431 V 8inch communicates via Bluetooth, very easy to use.  X431 V 8inch pad is specially designed for Android platform with clear and user-friendly interface. X431 V 8 inch Pad is equipped with an exclusive X-431 V protection sleeve to prevent it from being damaged;

You can use golo connector to connect to your smart phone, then you can do a all system fault diagnosis of vehicle at any time, then form a diagnosis report, and transfer the report to maintenance technicians and related personnel through the account management interface, then he get the remote consultation and repair advice.
launch x431 v 8inch bluetooth connection

Be the first to comment

Leave a Reply

Your email address will not be published.


*