Benz Trouble Repair

How to install MB SD C4 rechargeable batteries

How-to-install-MB-SD-C4-rechargeable-batteries-2
Problem: Hello MB star I just recieved My tablet and it looks and work Very good . But The sd connect interface is Saying “please put in [...]

MB SD Connect C5 Star Xentry Diagnosis Hardware, Software, Guide, Install, Upgrade

MB-SD-Connect-C5-Star-Xentry-Diagnosis-Hardware-Software-Guide-Install-Upgrade-11
MB SD Connect C5 Star Xentry Diagnosis Hardware, Software, Guide, Install, Upgrade Well, after buying lots of Xentry Connect and working with them, I [...]

(Solved)MB Star C6 OEM Xentry Diagnostics cannot read data when connected to truck

MB-Star-C6-OEM-Xentry-Diagnostics-cannot-read-data-when-connected-to-truck
Sometimes it will happen: when MB Star C6 OEM Xentry is connected to the truck with the supplied cable, there will be a situation where the data cannot be [...]

SD Connect C5 DOIP MB Star Diagnosis Support DOIP for Mercedes Benz Cars and Trucks

MB-Star-C5-DOIP
Top Reasons to Get MB SD Connect C5 DOIP: 1. The new SDconnect C5 is able to work for DoIP. It's the only C5 that supports ethernet communication [...]

2013 Mercedes C 220 Parking Sensor Faults Diagnosis – XTOOL A80 Pro Works

xtool-a80-pro-benz-c220-parking-sensor-fault-1
It is a 2013 Mercedes Benz C 220 diesel. The customer complains that the parking sensors at the rear are not working. So we’re going to see what fault codes [...]

VXDIAG Benz C6 Xentry Update to V2021.06

VXDIAG-Benz-C6-Xentry-Update-to-V2021.06-1
Vxdiag Benz C6 and VCX SE Benz Xentry new software 06/2021 was released in Junee 2021. Software including: BENZ  2021.06, xentry 29.8.2, DTS [...]

How to slove the Sd Connect 749 Error

How-to-slove-the-Sd-Connect-749-Error-20
Sd Connect 749 Error - (Fixed) SD C4 2019.9 error "the network connection to the .... No connection to the control units in the vehicle. It dosent change to [...]

MB SD C4 ewa-net Activation Unknown ID Error Solution

MB-SD-C4-ewa-net-Activation-Unknown-ID-Error-Solution-1
Customer Problem: I run Xentry software with my mb sd connect c4, when enter ewa-net to activate, an error message appears on the screen with “Current MAC [...]

How to Update MB SD Connect C4 Firmware

How-to-Update-MB-SD-Connect-C4-Firmware-6 (2)
If you had "00" icon and "Initialization of diagnosis multiplexer failed" problem when using the MB SD Connect C4 multiplexer, you need a sd c4 firmware [...]

Make Star C3 2021.03 Xentry work on W204

mb-star-c3-w204-2
Star C3 Star diagnostic system failed to work on W204? Here is the customer solution. You are at your risk! Problem: I have DELL D630 with Xentry 03/2021 [...]