KTM Bench pcmflash 1.99 read SID208 ECU data Confirmed working

Confirmed: Peugeot Boxer 2014 SID208 ECU data reading with KTM Bench pcmflash 1.99.

Image of KTM Bench connected to the Auto ECU Programmer and the computer.

ktm-bench-pcmflash-1.99-read-sid208-ecu-data-01

KTM Bench pcmflash 1.99  software and driver free download:

https://mega.nz/#!B9oTQahI!HNlNhOuMYmYghLlLyCSECV6GyLbDJLg8wTZrv1J2m10

including wiring diagram.

No password

100% safe to use

No tokens limitation

How to install pcmflash1.99 for running with KTAG bench? How to use PCMflash 1.99 to read write ECU data?

Using tips:

1). The computer can’t be connected to the internet;

2). KTM Bench can’t be updated;

otherwise the machine may be locked and will be charged for repair.

The advantage of dismantling ECU and not dismantling ECU:

1). Easy to operate and save time up to 5-10 minutes. Otherwise it may take more than 20minutes to dismantle the ECU and even more than 1 hour, also the box may be damaged during dismantling.

2) Dismantling the ECU may damage the original ECU sealing condition.

3) After dismantling the ECU, the boot must be connected.

4) After reading out the data, it needs to reseal ecu.

How to use KTM Bench to read SID208 ECU?

pcmflash 1.99 read the ECU data according to the ECU type as well as the CPU chip type. The wiring diagram is also based on the ECU type and CPU chip type.

pcmflash 1.99 can read the data for all the [71] ECU types via boot cable instead of removing the ECU, but it requires to connect GPT0 and GPT1 cable.

For example, if the ECU box removed from the car is edc17 c54, then the CPU is tc1797, just follow our supplied wiring diagram to connect the ECU instead of removing the ECU, good to know: GPT0 and GPT1 cables must be connected, then choose 1797 cpu option.

ktm-bench-pcmflash-1.99-read-sid208-ecu-data-02

ktm-bench-pcmflash-1.99-read-sid208-ecu-data-03

ktm-bench-pcmflash-1.99-read-sid208-ecu-data-04
ktm-bench-pcmflash-1.99-read-sid208-ecu-data-05
ktm-bench-pcmflash-1.99-read-sid208-ecu-data-06

KTM Bench pcmflash 1.99 reads the ECU data by dismantling the ecu and connect the boot, which is as the same as KTMflash 1.95. It requires to read the password first, then choose “read the data”.

Thanks

Be the first to comment

Leave a Reply

Your email address will not be published.


*