SuperOBD SKP900 program 2013 Range Rover Evoque remote key OK

This blog will show a tested success case: for 2013 Range Rover Evoque with only one working remote key, you can program new remote key by using SKP900 Auto Key Programmer about 3 minutes!
http://forobd2tool.com/wp-content/uploads/2017/06/13/6-1.jpg

Below are operating steps:
Connect Auto Key Programmer SKP-900 with car via OBD port then power up SKP-900.
Choose function “IMMOBILIZER”
http://forobd2tool.com/wp-content/uploads/2017/06/13/6-2.jpg

Choose car brand “LAND ROVER”
http://forobd2tool.com/wp-content/uploads/2017/06/13/6-3.jpg

Select model “EVOQUE (2012-)”
http://forobd2tool.com/wp-content/uploads/2017/06/13/6-4.jpg

Wait it is loading…

Choose “IMMOBILIZER SYSTEM” and press car start button to turn on ignition.
http://forobd2tool.com/wp-content/uploads/2017/06/13/6-5.jpg

Choose “ADD KEYLESS TYPE 1” it needs at least one registered keyless.
http://forobd2tool.com/wp-content/uploads/2017/06/13/6-6.jpg

Put the registered keyless close to car gear shift then turn ignition off.
SKP-900 key programmer will turn car ignition on, press YES button.
http://forobd2tool.com/wp-content/uploads/2017/06/13/6-7.jpg

Now car key number is 3.
http://forobd2tool.com/wp-content/uploads/2017/06/13/6-8.jpg

In 5 seconds quickly press the new key Unlock button.
http://forobd2tool.com/wp-content/uploads/2017/06/13/6-10.jpg

Now car key number detected is 4.
http://forobd2tool.com/wp-content/uploads/2017/06/13/6-11.jpg

Again quickly press the new key Unlock button in 5 seconds.
ADAPT SUCCESS!
http://forobd2tool.com/wp-content/uploads/2017/06/13/6-12.jpg

SuperOBD SKP900 from Obd2tool.com successfully programs a new key for 2013 Range Rover Evoque! New key is working!
http://forobd2tool.com/wp-content/uploads/2017/06/13/6-13.jpg

Be the first to comment

Leave a Reply

Your email address will not be published.


*